Openness: The entire system is highly open, all I/O is open, and development is not limited. Users can also design their own modules for easy access to the system.

Modular: Individual modules can be separated from the system and connected to other systems for easy initial evaluation of the product.

Expandability: With clear identification and convenient interface, developers can easily use all the resources of MCU, debug and various test programs.

Transplanted: Modular design brings superior portability, and each module can be connected to other MCUs (such as PIC, AVR, 51, etc.) or ARM (such as ARM Coretex-M0, ARM7, etc.).

Functionality: We will continuously provide peripheral modules for common functions. The peripheral modules and the system functions will be continuously updated so that you can design your own peripheral modules.





This open source electronic hardware STM32 development Kit is designed based on the STM32F205RBT6 as the microcontroller.

It has a rich expansion interface that supports access to a variety of peripheral modules, suitable for both beginners of MCU and experienced developers.

SPECIFICATION

STM32F205RBT6 Core Board
- Core: Cortex-M3 32-bit RISC
- Operating Frequency: 120MHz, 150 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP64
- Memories: 128kB Flash, 64+4kB SRAM
- MCU communication Interfaces:
- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN
- 1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY
- 1 x USB HS ULPI (external PHY required)
- AD and DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
- AMS1117-3.3: 3.3V voltage regulator
- MIC2075-2: onboard USB power management device
- For more interface description, please refer to the images.

DISTRIBUTION LIST

1 * STM32F205RBT6 development board
1 * PL2303 USB UART Board (mini)
1 * USB type A plug to mini-B plug cable
1 * USB type A receptacle to mini-B plug cable
1 * 4-pin 2-pin wires pack
1 * USB power cable
1 * Software CD
1 * 2.2 inch 320x240 Touch LCD (SPI touch panel)
1 * Analog Test Board (for testing embedded AD/DA)
1 * USB3300 USB HS Board (ULPI)
1 * SN65HVD230 CAN Board (CAN) 2pcs
1 * FM24CLXX FRAM Board (I2C)
1 * Micro SD Storage Board (SDIO/SPI)
1 * UDA1380 Board (I2S+I2C)
1 * NRF24L01 RF Board (B) (SPI+IOs) 2pcs
1 * AT45DBXX DataFlash Board (SPI+IOs)
1 * Ethernet Cable


ASIN코드 : B07MFJNW1J
PROD번호 : 690576975